RXA components

 Flange

Rack-mounted flange 482.6mm ( 19 " )
For chassis shelf mounting
With integrated slot for EMC shrapnel
Material : aluminum profiles
Surface treatment: anodizing, chromate passivation

Handle

Including two M4*12 fixed screw

Fill flange482.6mm ( 19 " )
● fill the gap without the rack-mounted flange
● with integrated slot for EMC (electromagnetic compatibility ) shrapnel
Material : aluminum profiles
Surface treatment: anodizing, chromate passivation
 

+Accessories:

EMC(电池兼容)屏蔽弹片，垂直。

The front horizontal beam

● Used for plug-in board guide rail installation
   and panel fixation. Double fixed-screw
   ensure the stability under high load state

● interval hole used to install the plug-in 
   guide with accurate HP interval 

● front threaded holes M4

● Through-out hollow hole

Material : aluminum profiles

Surface treatment: anodizing, chromate
passivation

Including four M4*12 fixed screw

+ Accessories:

 The 84TE M2.5 threaded plate

！In addition to:

 Details of M4*12 fixed screw 【please see the “fasteners”】

The rear horizontal beam

● Used for plug-in board guide rail installation
   and panel fixation. Double fixed-screw
   ensure the stability under high load state

● interval hole used to install the plug-in
   guide with accurate HP interval 

● front threaded holes M4

● run-through hollow hole

Material : aluminum profiles

Surface treatment: anodizing, chromate
passivation

Including four M4*12 fixed screw

+Accessories:

 The 84TE M2.5 threaded plate

！In addition to:  

 Details of M4*12 fixed screw 【please see the “fasteners”】

Front horizontal upper- extension beam

● Used for plug-in board guide rail installation
   and panel fixation,double screws can 
   ensure the stability.

● The interval hole array is used to TE
   interval precise installation guide plugin
   panel

● Positive thread M4

● The throughout hollow hole 

Material : aluminum profiles

Surface treatment: anodizing, chromate
passivation

Including four M4*12 fixed screw

+Accessories: 

 The84TEM2.5threadedplate

！In addition to:  

 Details of M4*12 fixed screw 【please see the “fasteners”】

The plug-in board guide plastic (RX-A)
● For installation and collaborations of the
   plug-in panel, and contact spring installatrion
● "For 160, 220, 280 (mm) circuit board, the
   biggest to 2mm specific thickness
● Establish electrical connection between
   circuit board and components with
   installation of contact spring.
● Environment temperature: 45 ℃ ~ 75 ℃,
   flame retardant level:  2
● Material: strengthened polycarbonate + spun
   glass

The plug-in board guide

three section combination (RX-A)

● Rated 1.6 mm circuit board,

● middle aluminum + two extreme pieces

● The middle aluminum can be cut by
   customized definition

● Suitable for  60 - 450 mm plug-in boards,
  whose depth can be cut by customized
  definition

● Ambient temperature : -45 ℃ ~ 75 ℃ flame
   retardant grade : two

Material: aluminum + client
( strengthened polycarbonate )

Block cover plate
●Used to cover the enclosure in up and down directions
●Fixed holes array with 10 mm intervals
Material: 5052 light alloy steel plate or selection
of 1.0 mm
Surface treatment: anodic oxidation, chromium
acid passivation

Ventilation cover plate
●Used to cover the enclosure in up and down
  directions
●Fixed holes array with 10 mm intervals
●Material: 5052 aluminium magnesium alloy
  board 1 mm
Surface treatment: anodic oxidation, chromium
acid passivation

RX-A type

Used to support the enclosure structure and to build
enclosure subject with horizontal beam .

● fixed 10mm intervals in the array for installation
  of horizontal beams

● positioning convex platform height: 1mm

Material: 5052 light alloy plate 2.5 mm

Surface treatment: anodic oxidation, chromium acid
of meal

 unit：mm

Material: aluminium magnesium alloy profile 6063A-T5

Height: 1 U, 2 U, 3 U, 4 U, 5 U, 6 U, 7 U, 8 U, 9 U, 10 U

Width: 4 TE, 6 TE, 8 TE, 10 TE, 12 TE, 14 TE, 20 TE, 21 TE, 40 TE, 42 TE, 84 TE

Features: made of aluminium magnesium alloy profile, can install electromagnetic shielding shell fragments,
              can deserve to choose the type of handle, rejector device, panel fasteners, PCB stents and flat
              panel (economic), exterior is available at any size.

Surface treatment: chromium acid passivation/anodic oxidation/coating/spray paint

Color: aluminum instinctive quality/black/other

* process in accordance with customer’s requirements

 Plug-in box           

Plug-in box  

Component put-in box, divided into type
A and B type

Material: 6063A -T5

Surface treatment: anodic oxidation